In case you are looking for the Coolpad 3503i flash file, this is the right article for you. We have mentioned how you can install the Coolpad Mega 3 flash file using the YGDP tool. Stay tuned to the article to know more about Firmware Stock ROM of Coolpad 3503I mobile devices.
Things to Remember
Below we have mentioned all the things that you will have to do before you can begin with the installation of the Coolpad 3503i flash file. Read all the things below.
- First, you need to have some basic knowledge about the process. In case you do not know, you will have to seek help from an expert. Also, you will have to make sure that you use the tutorial for a particular device.
- Also, you will have to download the firmware file and the tool file from an authenticated source only. You will have to look for the driver file on the system.
- Other than this, you will have to create a backup of all the data available on the device. It is a must that you do that because you will lose all the data after the completion of the process.
- You will also have to charge the device completely or at least up to 70 percent so that you can use it till the end of the process.
- You will also have to scan all the files before using them so that you can be sure that the file is safe to use on the system.
Steps to Install Coolpad Mega 3 3503i Flash File
Now that you have fulfilled all the requirements that we have mentioned in the above section of the article, you can proceed with the process. Below we have mentioned all the steps that you will have to follow to install the Coolpad 3503i flash file on the device. Read the steps carefully and follow the steps in the same way as mentioned.
- First, you will have to download the USB driver on the system. You will then have to click on the downloaded file and then you will have to follow all the instructions appearing on the screen. In case you already have the driver on the system, skip the step.
- Next, you will have to download the stock firmware file for your device. You will then have to click on the downloaded file and extract the contents of the firmware file.
- You will also have to download the YGDP tool on the system. You will then have to extract the contents of the tool file on the system.
- Now open the tool folder, you will have to click on the YGDPassembly file to open the tool window for you.
- In the tool window, you will have to enter a password. You will have to enter a password as 369 or 9527 and then click on the login option.
- In the tool window, you will have to click on the select option and then you will have to redirect the tool to the location where you have stored the firmware file.
- Click on it to select it and then you will have to click on the start option to begin the flashing process.
- Turn off the device and connect it to the system with the help of a USB cable.
- Wait for the process to complete. When the process will complete, you will get the green bar on the screen.
- Detach the cable and terminate the tool window.
Download Coolpad Mega 3 [3503i] Stock Firmware ROM (Flash File)
So, this was the full stepwise process that you will have to follow to install the Coolpad 3503i flash file on the device. We have tried to provide you with all the necessary information. We hope that the article was helpful to you.