In case you are looking for the Huawei Ascend Y520-U22 flash file, this article will surely help you. We have mentioned how you can install the Huawei Y520 flash file (Firmware Stock ROM) with the help of a USB cable. Read the article till the end to know more about it.
Before you can begin the flashing process, there are certain things that you will have to do. These things will help you to install the flash file easily.
- First, you need to be aware of the basic technicalities of the process. In case you are not aware, you will have to seek help from an expert. Always remember to use the tutorial for the specified device only.
- You will also have to keep in mind that you will lose all the data after the completion of the process, so, you need to create a backup of all the data.
- It is a must to charge the device completely or at least up to 60 percent so that you can use the device till the end of the process.
- You will also have to download the driver file and firmware file from an authenticated source and according to the device that you are using. Also, download the latest version of the tool file.
- Lastly, scan all the files so that you can be sure that all the files are safe to use on the system.
Steps to Install Huawei Y520-U22 Flash File
We hope that you have fulfilled all the requirements that we have mentioned in the above section of the article. You can now proceed with the process. Below we have mentioned all the steps that you need to follow to install the Huawei Y520-U22 flash file [Stock Firmware]. Read all the steps properly and follow them in the same way as mentioned.
- To begin with, you need to download the MediaTek driver on the system. You will then have to click on the downloaded file and open the installation window. Follow all the instructions appearing on the screen to complete the installation process. In case the driver is already available on the screen, skip the step.
- Next, you will have to download the stock firmware file for the device. Click on the downloaded file to extract the contents of the firmware file.
- Now, you need to download the SP flash tool on the system. You will then have to extract the contents of the tool file.
- You will now have to open the extracted tool folder and then click on the flash tool file. The tool window will then open on the screen.
- In the tool window, you need to click on the scatter-loading option and download agent option. The scatter file will be available in the Stock Rom that you have extracted.
- After this, you will have to untick the option for preloader.bin. You must do this because if you won’t, you can brick the device.
- You will also have to click on the download option to begin the process.
- Turn off the device and then connect it to the system with the help of a USB cable. You will also have to press the volume up button of the device so that the tool can detect the device.
- When the tool will detect the device, the process of flashing will begin.
- Wait for the process to complete. When the process will complete, you will see a green ring on the screen.
- In the end, detach the cable and terminate the tool window.
Download Huawei Y520-U22 Stock Firmware ROM (Flash File)
So, this is it. This was the full stepwise process that you need to follow to install the Huawei Ascend Y520-U22 Stock Firmware ROM. All the information that you need to know about installing the Huawei Y520-U22 flash file is mentioned in the article. We hope that the article was helpful.