Flash files can be helpful when you have to fix issues that you are facing in your device or add some new features to the device. They will help you to install the operating system of your device again. In this article, we are going to talk about the Intex Aqua Lions 2 flash file. We have mentioned in detail how you can install the Intex Aqua Lions 2 flash file (Firmware Stock ROM). Stay tuned to the article till the end to know more about it.
Points to Remember
In this section of the article, we have mentioned a list of all the things that you will have to do or keep in mind before starting the flashing process. Read the list below.
- To start with, you will have to download the firmware file and the tool file from an authenticated source only. You should also look for a compatible driver on the internet.
- You will also have to make sure that you know about the process. In case you are not aware of the technicalities, you will have to seek help from others. Always keep in mind that you can use this tutorial for a particular device only.
- Other than this, you will have to create a backup of all the data available on the device because you will lose all the data post flashing.
- It is a must to charge the device completely or at least up to 60 percent so that you can use the device till the completion of the process.
- You should also scan all the files before using them to be sure that they are safe to use on the system.
Steps to Install Intex Aqua Lions 2 Flash File
Now, you will have to use the SPD upgrade tool to install the Intex Aqua Lions 2 flash file on the device. Below we have mentioned all the steps that you will have to follow to install the Intex Aqua Lions 2 flash file. Go through the process carefully and follow in the same way as mentioned.
- First, you will have to download the SPD driver on your system. You will then have to click on the downloaded file and follow all the instructions appearing on the screen to complete the installation process. Also, if you have the driver on the system, skip this step.
- After this, you will have to download the stock firmware for your device. You will have to then extract the contents of the firmware file on the system.
- Now, you will have to download the SPD upgrade tool on the system and extract the tool contents also.
- Once done, you will have to open the extracted tool folder and then click on the Upgrade download file. It will open the tool window for you.
- In the tool window, you will have to look for the load packet option and then click on it to redirect the tool to the location where you have stored the firmware file.
- Now, select an appropriate firmware file for your device.
- You will now have to turn off the device and then you will have to connect it to the system.
- Wait for the process to complete. When the process will complete, you will see an upgrade successful message on the screen.
- Finally, detach the cable and terminate the tool window.
Download Intex Aqua Lions 2 Stock Firmware ROM (Flash File)
So, this is it. This was how you can install the Intex Aqua Lions 2 flash file on the device. We have tried to mention all the required information that you need to know before installing the Intex Aqua Lions 2 Stock Firmware ROM. We hope that the article was helpful for you.