Itel A44 Pro Firmware Stock ROM- Flash File

In case you are looking for the Itel A44 pro flash file / Firmware Stock ROM, this article will be surely helpful to you. We have provided you with an original Itel A44 pro flash file and explained the process to install the same. Read the article till the end to know more about it.

Things to Remember

Now, before you can start the flashing process, there are certain things that you will have to do so that you can carry out the process smoothly.

  • First, you need to have some basic knowledge about the process. In case you do not know, you will have to seek help from an expert.
  • Always remember to use the tutorial for the specified device only. In case you use it for any other device, you can damage the device.
  • You would know that you will lose all the data after the completion of the flashing process, so, you need to create a backup of all the data available on the device.
  • Also, you need to charge the device completely or at least up to 70 percent so that you can use the device till the end of the process.
  • Always remember to scan all the files so that you can be sure that all the files are safe to use on the system.

Steps to Install Itel A44 Pro Flash File

Now that you have fulfilled all the requirements that we have mentioned in the above section of the process, you need to proceed with the process. Below we have mentioned all the steps that you need to follow to install the Itel A44 pro flash file. Read all the steps carefully and follow them in the same way as mentioned.

  • To begin with, you need to download the MediaTek driver installer on the system. You will then have to click on the downloaded file to start the installation process. Follow all the on-screen instructions to complete the installation process. If the driver is already available on the system, skip the steps.
  • Next, you need to download the stock firmware for the device. You will now have to click on the downloaded file and extract the contents of the firmware file.
  • Now, you need to download the SP flash tool on the system and then extract the contents of the tool file.
  • When done, you will have to open the folder in which you have extracted the tool and then click on the flash tool file. It will redirect you to the tool window.
  • In the tool window, you will now have to click on the scatter-loading option and download agent option. The scatter file will be available in the stock ROM that you have downloaded.
  • After this, you will have to untick the option for the preloader.bin checkbox. It is a must to do because if you won’t, you can brick the device.
  • Next, you need to click on the download option to start the flashing process.
  • Now, you need to turn off the device and then connect it to the device with the help of a USB cable. Also, you need to press the volume up button of the device so that the tool can detect the device.
  • When the tool will detect the device, the process of flashing will begin.
  • Wait for the process to complete. On completion, a green ring will appear on the screen.
  • Finally, detach the cable and terminate the tool window.

Download Itel A44 Pro Stock Firmware ROM (Flash File)

To use Itel A44 Pro Flashing Tool, You must download and install WinRAR or 7Zip.

So, you have successfully installed the Itel A44 Pro Stock Firmware ROM on the device. Following all the steps in the same way as mentioned will help you to install the Itel A44 pro flash file easily. We hope that the article was helpful.

Leave a Reply