Itel IT 1508 Stock ROM Firmware: Flash file

Flash files can help settle various issues identified with your device. You can streak your gadget on the off chance that you are confronting issues like boot loop issues, IMEI issues, programming issues, or even the dead issue. Other than this, you can likewise utilize the flash file to update or downsize your device. In this article, we have referenced how you can utilize the Itel 1508 Flash file. Remain tuned to the article to find out about the Itel IT1508 Flash file.

Itel IT 1508 Stock ROM Firmware

Things to keep in mind

Below we have listed certain things that you need to have on your system before proceeding with the installation process. Once you fulfill all the requirements and then only proceed.

  1. The first thing that you need to do is to charge your Itel device. The flashing process will take a long time and hence you need to charge it.
  2. Also, you will have to create a backup of all your data. After the flashing process, the data on your device will be deleted permanently.
  3. Also, you will have to make sure that you are using the compatible version of the drivers and the tools on your system. You can check for the latest version on the internet.
  4. Other than this, you will also have to scan your file before installing it. You can scan the file using any anti-virus software to make sure that the file is safe to download.

Steps to install Itel IT1508 Flash File

To flash your Itel 1508 device, you need to install the SPD upgrade tool on your system. Follow the steps mentioned below in the same sequence as they are listed to make sure that you do not face issues.

  1. Initially, you will have to get the SPD driver on your system. You will then have to install the driver by following all the instructions appearing on your screen. In case you already have it on your system, you can skip this step.
  2. Once done, you will have to look for the stock firmware on the internet for the device. You will then have to download it. The firmware comes in the compressed format, you will have to extract the files.
  3. The next thing that you need on your system is the SPD upgrade tool. You will have to download it on your system and then extract all the files in a new folder. Itel 1508 flash file
  4. You will then have to open the folder and look for the UpgradeDownload file. Click on it to start the tool. Itel 1508 flash file download
  5. In the new window, you will have to click on the button of the loaded packet.
  6. You will then have to look for the stock firmware on your system and then tap on the option to open it. It will then load your stock firmware. Itel 1508 stock firmware
  7. Once done, you will have to connect the device that you are using with the system via USB cable. Also, you have to make sure that you have switched off the device.
  8. After this, you will have to click on the option to start downloading. It will then start the process of flashing.
  9. Once done, you will have to wait till the process completes. It may take some time to complete.
  10. You will see a passed prompt on the tool when the process of flashing will complete.
  11. Finally, you will have to terminate the tool and remove the USB cable to disconnect your device and the system.

This was a whole process on how to use the Itel 1508 Firmware Stock ROM. Following the steps will help you to fix issues with your device. We hope that the article will help you.

Leave a Reply