Bricked your Itel device? Unbrick it with the help of Itel It1518 flash file. You can also use the flash file to fix many common issues that you may face with the device. Also, you can use the flash file to upgrade the device to the latest version or downgrade them to the factory version. Many people do not know how to install the Itel It1518 flash file, in this article we are going to help you with it. We have mentioned everything that you need to know to carry out the process. Read the article till the end to know more about the Itel It1518 flash file.
To carry out the process easier, there are certain things that you will have to do. We have mentioned the list of all the things. Read the list properly.
- To start with, you will have to be aware of all the technicalities. Off the chance you are not aware, you will have to seek help from someone aware.
- We will suggest you create a backup of all the data present on the device. It is a must that you do that because post flashing, you will lose all the data. So, to save the data, you will have to create a backup.
- Other than this, you will have to charge the device completely or at least up to 70 percent so that you can use it till the end of the process.
- Also, we will suggest you download the tool from an authenticated source only. It is a must that you download a compatible driver.
- Lastly, you may have to scan all the files before you can use them on the system. It is important to be sure that you are using a safe file on the system.
Steps to Install Itel it1518 Flash File
As we have mentioned, you will have to use the SPD tool to install the Itel it1518 flash file. Here, we have discussed how you can install it. Below we have mentioned the stepwise process that you need to follow to install the flash file. Read the steps carefully and pursue the process in the same way as mentioned.
- Initially, you will have to download the SPD driver on the system. After downloading, you will have to follow the on-screen instructions to complete the installation process. In case you already have it on the system, you may have to skip the step.
- Now, you will have to download the firmware file for the device. You will then have to extract the contents of the file to the desired location.
- Next, you will have to download the SPD upgrade tool on the system. You will have to extract the contents of the file also.
- Once done, you will have to open the extracted folder, and then you will have to click on the upgradedownload.exe file. It will open the tool window for you.
- You will have to click on the Browse option and then you will have to redirect the tool to the location where you have stored the flash file.
- When done, you will have to turn off the device, and also, you will have to connect it to the system using the USB cable.
- Now, you will have to click on the start button to begin the flashing process.
- Wait for the process to complete. When the process will complete, you will have to detach the cable and then terminate the tool window.
Download Itel IT1518 Firmware Stock ROM (Flash File)
So, now that the device is flashed, you will have to start the device. This was all you need to do to install the Itel it1518 flash file. We hope that this article helped.