Firmware is important for the working of your device. It is embedded in the hardware and decides how the device is going to work when you give it any instruction. You will have to install a flash file to upgrade or downgrade your firmware. You can use the flash file to fix common issues like IMEI issues, boot loop issues, software issues, and dead issues with your device. In this article, we have talked about the Karbonn Aura Sleek 4G flash file. We have mentioned the full stepwise process that you need to follow to install the Karbonn Aura Sleek Firmware Stock ROM. Stay tuned to the article till the end to know more about it.
Now, in the section of the article, we have mentioned a list of different things that you need to do so that you can carry out the process easily.
- The very basic thing that you have to do is to be aware of the technicalities of the process. In case you are not aware, you need to seek help from an expert.
- Also, you need to keep in mind that you need to use this tutorial for a particular process. If you use it for any other device, you can damage the device.
- You need to download the firmware file and the tool file according to the device that you are using. Also, you need to download a compatible driver on the system.
- Other than this, you will have to use the device till the end of the process, so, you need to charge the device at least up to 70 percent.
- You will also have to create a backup of all the data because you will lose all the data after the completion of the process.
- It is a must to scan all the files to be sure that all the files are safe to use on the system.
Steps to Install Karbonn Aura Sleek Flash File
You will have to use the SP flash tool to install the Karbonn Aura sleek 4G flash file. Here is how you can proceed with the process. Below we have mentioned all the steps that you need to follow to install the Karbonn Aura sleek Stock Firmware on the device. Read all the steps properly and follow in the same way as mentioned.
- First, you need to download the Mediatek driver on the system. You will then have to click on the downloaded file and then open the installation window. Follow all the instructions appearing on the screen to complete the installation process. In case the driver is present on the system, skip the step.
- After this, you need to download the firmware file for your device. Also, you need to extract the contents of the firmware file.
- Also, you need to download the SP flash tool on the system. It will download in the zip format. So, you need to extract the contents of the tool files.
- Once done, you need to open the extracted tool folder and then click on the flash tool file. The tool window will open on the screen.
- Next, you will have to click on the download agent option and scatter-loading option. You will have to look for the scatter file in the stock ROM that you have downloaded.
- Now, you will have to untick the option for preloader.bin. You must do this because if you won’t, you can brick the device.
- Also, you need to click on the download option to begin the flashing process.
- You will also have to turn off the device and then connect it to the system with the help of a USB cable. You need to press the volume up button of the device so that the tool can detect the device.
- When the tool will detect the device, the process of flashing will begin.
- Wait for the process to complete. It will take some time to complete. On completion, a green ring will appear on the screen.
- You will finally have to terminate the tool window and detach the cable.
Download Karbonn Aura Sleek 4G Stock Firmware ROM (Flash File)
So, this is it. This was all you need to know about installing the Karbonn Aura sleek 4G flash file. Following all the steps, in the same way, will surely help you to install the Karbonn Aura sleek 4G Stock Firmware ROM easily. Hopefully, the article was helpful.