Karbonn K9 Smart Firmware Stock ROM- Flash File

Karbonn K9 Smart Flash FileIn case you are looking for the Karbonn K9 smart flash file, this article can be helpful for you. We have mentioned how you can install the Karbonn K9 smart firmware Stock ROM on the device. Read the article till the end to know more about it.

Points to Remember

Now before you can start the flashing process, here is a list of certain things that you need to keep in mind or do. These things will help you to carry out the process easily.

  • First, you will have to make sure that you are using the tutorial for a particular device only. You must also have some basic knowledge about the process. In case you are not aware, you will have to seek help.
  • Next, you need to charge the device completely or at least up to 70 percent so that you can use the device till the end of the process.
  • You would know that you will lose all the data post flashing. So, you need to create a backup of all the data available on the device.
  • Also, you will have to download the firmware file and the tool file according to the device that you are using. It is a must to use a compatible driver on the system.
  • You must know that you have to scan all the files before using them to be sure that they are safe to use on the system.

Steps to Install Karbonn K9 Smart Flash File

Now that you have fulfilled all the requirements that we have mentioned in the above section of the article, here is how you can proceed with the process. We have mentioned all the steps that you will have to follow to install the Karbonn K9 smart flash file. Read all the steps carefully and follow in the same way as mentioned.

  • To start with, you will have to download the MediaTek driver on your system. You will then have to click on the downloaded file and open the installation window. Follow all the on-screen instructions to complete the installation process. In case you already have the driver on your system, skip the step.
  • Next, you need to download the stock firmware device on your system. You will then have to extract the contents of the firmware file.
  • After this, you will have to download the SP flash tool on your system and then extract the tool contents also.
  • Now, you will have to open the extracted tool folder and then click on the flash tool file to open the tool window.
  • In the tool window, you will have to click on the scatter-loading option and download agent option. You can look for the scatter file in the stock ROM that you have downloaded.
  • After this, you will have to untick the checkbox for preloader.bin. You must d this because if you won’t, you will brick the device.
  • Also, you need to click on the download option to start the flashing process.
  • You will have to turn off the device and then connect it to the system with the help of a USB cable. Press the volume up button of the device so that the tool can detect it.
  • When the tool will detect the device, the process of flashing will start.
  • Wait for the process to complete. On completion, you will get a green ring on the screen.
  • Terminate the tool window and detach the cable.

Download Karbonn K9 Stock Firmware ROM (Flash File)

To use Karbonn K9 Smart Flashing Tool, You must download and install WinRAR or 7Zip.

So, this is it. This was all about installing the Karbonn K9 smart flash file on the device. Following all the steps, in the same way, will help you to carry out the process easily. We hope that the article was helpful to you.

Leave a Reply