If you are looking for the Lava V2S flash file, this article will help you. In this article, we have mentioned how you can install the Lava V2S flash file [Stock Firmware ROM] with the help of the SP flash tool. Stay tuned to the article to know more about it.
In this section of the article, we have mentioned a list of certain things that you will have to do before installing the Lava V2S flash file.
- To start with, you need to make sure that you are using this tutorial for a specified device. You must not use it for any other device.
- Next, you will have to charge the device completely or at least up to 70 percent because you need to use the device till the end of the process.
- Also, you would know that you will lose all the data post flashing. So, you need to create a backup of all the data available on the device.
- It is a must that you download the firmware file and the driver file according to the device that you are using. You will have to look for the latest version of the required tool.
- You need to have some basic knowledge about the process. In case you do not know, you will have to seek help from an expert.
- Scan all the files to be sure that they are safe to use on the system.
Steps to Install Lava V2S Flash File
To install the Lava V2S flash file, you will have to use the SP flash tool. In this section of the article, we have mentioned how you can do it. Below we have mentioned all the steps that you need to follow to install the Lava V2S flash file. Go through all the steps properly and follow in the same way as mentioned.
- First, you will have to download the MediaTek driver on the system. Now, you need to start the installation process by clicking on the downloaded file. You will then have to follow all the instructions appearing on the screen to complete the installation process. In case you have the driver on the system, skip the step.
- After this, you will have to download the firmware file on the system. You will now have to extract the contents of the firmware file.
- Next, you will have to download the SP flash tool and then extract the contents of the tool file.
- After this, open the extracted tool folder and then click on the flash tool file. The tool window will open on the screen.
- You will now have to click on the scatter-loading option and download agent option. The scatter file will be available in the stock ROM that you downloaded.
- Also, you need to untick the option for preloader.bin. It is a must to do because if you won’t, you can brick the device.
- Once done, you will have to click on the download option to begin the process.
- Next, you will have to switch off the device and connect it to the system. You will also have to press the volume up button of the device to let the tool detect the device.
- When the tool will detect it, the process will begin automatically.
- Now, wait for the process to complete. When it will complete, you will see a green ring on the screen.
- After this, you will have to terminate the tool window and detach the cable.
Download Lava V2s Stock Firmware ROM- Flash File
So, now your device is flashed completely. We have tried to provide you with all the required knowledge before installing the Lava V2S Stock Firmware ROM. Hopefully, the article was helpful.