Flash files can be helpful when you have to upgrade the device or downgrade it to the factory version. Also, you need to use the flash file if you have to fix issues with your device. In this article, we have talked about the LYF Wind 3 LS-5502 flash file. We have mentioned everything that you need to know about the LYF LS 5502 Wind 3 flash file (Firmware Stock ROM). Stay tuned to the article to know more about it.
To carry out the process easier, there are certain things that you will have to do. You must keep these things in mind before you can start the process.
- First, you need to have some basic knowledge about the process. Off the chance you do not know, you will have to seek help from an expert.
- Always remember that you can use this tutorial for a particular device only. If you use it on any other device, your device can be damaged.
- Also, you need to make sure that you have created a backup of all the data available on the device. It is a must because you will lose all the data post flashing.
- You must also charge the device completely or at least up to 70 percent so that you can use the device till the completion of the process.
- It is a must to download the tool file and the firmware file according to the device that you are using. Look for a compatible driver on the system.
- Lastly, you need to scan all the files so that you can be sure that the files are safe to use.
Steps to Install LYF Wind 3 LS-5502 Flash File
To install the LYF LS 5502 flash file, you will have to use the QFIL tool. Below we have mentioned all the steps that you will have to follow to install the LYF LS-5502 flash file. Read all the steps carefully and follow in the same way as mentioned.
- To start with, you will have to download the Qualcomm driver on the system. You will then have to click on the downloaded file and start the installation process. Follow all the steps appearing on the screen to complete the installation process. If you already have the driver on the system, skip the step.
- After this, you will have to download the stock firmware file on the system. You will then have to extract the files of the firmware.
- Also, you will have to download the QFIL tool on the system. Now, you will have to extract the tool contents.
- Now, you will have to open the tool folder and then click on the QcomDloader file to open the tool window for you.
- Next, you will have to click on the select option and then you will have to redirect the tool to the location where you have stored the firmware file.
- Now, you will have to turn off the device and then connect it to the system with the help of a USB cable.
- After this, you will have to click on the flash option to start the process.
- Wait for the process to complete. When the process will complete, you will see a successful message on the screen.
- You will now have to detach the cable and terminate the tool window.
Download Lyf Wind 3 LS-5502 Stock Firmware ROM (Flash File)
So, now your device is flashed and you can start it again. This was all you need to know about the LYF LS-5502 flash file. Following all the steps in the same way as mentioned will help you to install the LYF Wind 3 LS-5502 Stock Firmware ROM easily. Hopefully, the article was helpful to you.