LYF LS4008 Flame 7S Firmware Stock ROM – Flash File

LYF LS4008 Flame 7S Flash FileFlash files can be helpful to you in different ways. You can use a flash file to fix common issues like software issues, IMEI issues, dead issues, and boot loop issues that you can face with the device. Also, you can use the flash file to install the operating system of the device again. In this blog, we have talked about the Lyf Ls 4008 flash file / Firmware Stock ROM. We have mentioned how you can install the LYF LS4008 Flame 7S flash file with the help of an SPD tool. Read the article till the end to know more about it.


Now, in this section of the article, we have mentioned a list of certain things that you will have to do so that you can install the LYF Flame 7S flash file.

  • To start with, you need to have some basic knowledge about the process. In case you do not know, you will have to seek help from an expert.
  • Always remember to use the tutorial for the specified device only. Using it for any other device can damage the device.
  • You would also know that you will lose all the data after the completion of the process. So, you must create a backup of all the data.
  • Next, you need to charge the device completely or at least up to 70 percent so that you can use the device till the end of the process.
  • You must also download the driver file and firmware file for the device from an authenticated source and compatible with the device. Look for the latest version of the tool file.
  • Scan all the files so that you can be sure that all the files are safe to use on the system.

Steps to Install LYF Flame 7S LS4008 Flash File

Hopefully, you have successfully fulfilled all the requirements that we have mentioned in the above section of the article, you can pursue the process. Below we have mentioned all the steps that you need to follow to install the LYF LS4008 Flame 7S  Stock Firmware on the system. Go through all the steps carefully and follow in the same way as mentioned.

  • To begin with, you will have to download the SPD driver on the system. You will then have to click on the downloaded file and then open the installation window. Follow all the instructions appearing on the screen to complete the installation process. In case the driver is already available on the system, skip the step.
  • After this, you need to download the Stock ROM that you have downloaded. You will then have to extract the contents of the firmware file.
  • Next, you need to download the SPD upgrade tool on the system. Extract the contents of the tool file from the system.
  • Once done, you will have to open the extracted tool folder and then click on the upgrade download file. The tool window will then open on the screen.
  • In the tool window, you will have to click on the load packet option. Now redirect the tool to the location where you have extracted the firmware file.
  • You will then have to turn off the device and then connect it to the system with the help of a USB cable.
  • Now, click on the start option to begin the process.
  • Wait for the process to complete. On completion, an upgrade successful message will appear on the screen.
  • In the end, detach the cable and terminate the tool window.

Download Lyf Flame 7S Stock Firmware ROM (Flash File)

To use Lyf Flame 7S Flashing Tool, You must download and install WinRAR or 7Zip.

So, this is it. You have successfully installed the LYF LS4008 Flame 7S flash file on the device. This was all the information that you need to know about installing the LYF Flame 7S LS4008 Stock Firmware ROM. We hope that the article has helped you.

Leave a Reply