Micromax A104 Firmware Stock ROM: Flash File

Micromax A104 FirmwareIn case you are confused about how to use the Micromax A104 flash file, this article is for you. You can easily resolve issues associated with your device using the flash file. In case you are facing issues like software issues, IMEI issues, dead issues, or boot loop issues, you can easily fix them using the flash file. You need to follow a stepwise process to install the Micromax A104 flash file. In this article, we are going to explain to you the same. Here is how you can use and install the Micromax A104 flash file. Read the article till the end.


Here are largely the necessities that you need to fulfill preceding proceeding with the process. Fulfilling all the necessities will only help you to carry out the process smoothly.

  • In the first place, you should charge your device completely. Your device needs to keep working while the cycle is going on and therefore, it should be charged.
  • Moreover, you should make a reinforcement of the data on your device. After the flashing cycle, the data on your framework will be deleted.
  • Other than this, you ought to install the SP flash tool, USB drivers, and VCOM driver on your system. Guarantee you download the latest and viable version.

You will also have to scan the files and tools that you have downloaded to make sure that they are safe to use.

Download Micromax A104 Firmware Stok ROM Tool

Steps to install Micromax a104 Flash File

To flash your Micromax device, you will have to use the SP Flash tool. Follow the steps mentioned below to install the Micromax a104 flash file. Ensure that you read the steps carefully and follow the sequence in which they are mentioned.

The first step in the process is to download the MediaTek driver and then install it on your system. Follow the instructions on the screen to complete the installation process. If you have it on your system, you can skip the step.

After this, you will have to find the firmware for your device and then download it. You can easily find it on the system. You will also have to extract the files of the firmware.

Also, you will have to download the SP Flash tool and then you will have to extract the files also.

In the unzipped folder, you will have to look for the flash tool file and then click on it to start the tool.

In the tool window, you will have to click on the Scatter0-loading option. You will then have to select the scatter file. The scatter file can be easily found in the Stock ROM of the device.

After that, you will have to find the preloader option and then click on it to uncheck the checkbox. In case you won’t untick it, there are chances that you will brick your device.

You will then have to select the download option and then it will start the flashing process.

Once done, you will have to use a USB cable to connect your device and the system. Also, you will have to make sure that you have turned off the device. Once you have connected your device, you will have to press any of the Volume buttons so that your phone can be detected by the tool.

The process will start once your device will be detected.

After the completion of the process, you will see a green ring on the screen.

Finally, you will have to close the window and disconnect your device and the system.

Your device will then be flashed. We hope that you have found the article helpful and informative. We hope that the article helped you.

Leave a Reply