You can use the flash file for many reasons and the flash files / Firmware Stock ROM are different for different devices. In this article, we have talked about the Micromax A77 Canvas Juice flash file. Go through the article properly to know more about it.
To carry out the process easier, there are certain things that you need to do. These things will help you to carry out the process easily.
- To begin with, you need to be aware of the basic technicalities. In case you are not aware, you will have to consult an expert.
- You also need to be aware that you should not use the tutorial for any other device. If you do it, you can brick the device.
- Also, you need to download the firmware file and the driver file compatible with the device. You will also have to look for the latest version of the tool file.
- It is a must that you charge your device completely or at least up to 60 percent so that you can use the device till the end of the process.
- You would know that you will lose all the data after the completion of the flashing process so, you need to create a backup of all the data available.
- Also, you need to scan all the files to be sure that they are safe to use on the system.
Steps to Install Micromax A77 Canvas Juice Flash File
Hopefully, you have read and fulfilled all the requirements that we have mentioned in the above section of the article. Here is how you can proceed with the process. Below we have mentioned all the steps that you need to follow to install the Micromax A77 Canvas Juice flash file. Go through all the steps carefully and follow in the same way as mentioned.
- To begin with, you need to download the MediaTek driver on your system. You will then have to click on the downloaded file and begin the installation process. Follow all the instructions appearing on the screen to complete the installation process. If the driver is already available on the system, do not bother downloading again.
- Next, you will have to download the firmware file for the system. You will have to click on the downloaded file and extract the contents of the firmware file.
- Once done, you need to download the SP flash tool on the system and extract the contents of the tool files also.
- Now, open the extracted tool folder and then click on the flash tool file. The tool window will then appear on the screen.
- You will now have to click on the download agent option and scatter-loading option. Select the scatter file from the stock ROM that you have downloaded.
- Next, you will have to untick the checkbox for preloader.bin. It is a must to do because if you won’t, the device can be bricked.
- Also, you need to click on the download option to start the flashing process.
- Other than his, you will have to connect the device to the system with the help of a USB cable. You will also have to press the volume up button to let the tool detect your device.
- When it will detect the device, the process of flashing will begin.
- The process will take some time to complete. When the process will complete, a green ring will appear on the screen.
- Finally, detach the cable and terminate the tool window.
Download Micromax A77 Stock Firmware ROM (Flash File)
This is it. This was how you can install the Micromax A77 Stock Firmware ROM on the system. All the information that you need to know before installing the Micromax A77 flash file is mentioned in the article. Hopefully, the article will help you.