Micromax Bolt A068 Firmware Stock ROM- Flash File

Micromax Bolt A068 Flash FileIn case you are looking for a Micromax Bolt A068 flash file, this is the right article for you. It can be helpful to you when you have to upgrade your device to the latest version or you need to downgrade it to the factory version. In this article, we are article, we are going to talk about the Micromax A068 Firmware Stock ROM. We have mentioned how you can install the Micromax A068 flash file with the help of the SPD upgrade tool. Read the article till the end to know more.


Before you can start the process, here is a list of requirements that you will have to fulfill. It is a must to do that because then you can carry out the process easily.

  • First, you will have to make sure that you are aware of the basic technicalities. In case you are not aware, you will have to seek help. Also, it is a must that you use the tutorial for a particular device only.
  • You would know that you will lose all the data available on the device post flashing, so, you need to create a backup of all the data.
  • Other than this, you need to charge the device completely or at least up to 70 percent so that you can use it till the end of the process.
  • It is a must that you download the tool file and the driver file according to the device that you are using. Also, you will have to look for the compatible firmware file for the device.
  • In the end, you must scan all the files before using them on the system to be sure that they are safe to use.

Steps to Install Micromax Bolt A068 Flash File

Now that you have fulfilled all the requirements that we have mentioned in the above section of the article, you can proceed with the process. Below we have mentioned all the steps that you need to follow to install the Micromax A068 flash file. Read all the steps properly and follow in the same way as mentioned.

  • To begin with, you will have to download the SPD driver on the system. You will then have to click on the downloaded file and follow all the on-screen instructions to complete the installation process. In case you have the driver on the system, you will have to skip the step.
  • Next, you will download the stock firmware file on the system. You will have to extract the firmware files to the desired location.
  • Now, you will have to download the SPD tool file on the system and extract the tool files also.
  • Open the extracted tool folder and click on the upgrade download file to open the tool window. In the tool window, you will have to click on the load packet option.
  • You will now have to redirect the tool to the location where you have stored the firmware file. Select an appropriate firmware file.
  • When done, you will have to turn off the device and connect the device to the system with the help of a USB cable.
  • Now, you will have to click on the start option to begin the flashing process. Wait for the process to complete.
  • On completion, you will get an upgrade successful message on the screen. Now, you will have to detach the cable and terminate the tool window.

Download Micromax A068 Stock Firmware ROM (Flash File)

To use Micromax Bolt A068 Flashing Tool, You must download and install WinRAR or 7Zip.

Now your device is flashed. This was how you can install the Micromax A068 flash file on the device. We have tried to provide you with all the necessary information. We hope that the article was helpful to you.

Leave a Reply