In case you are facing issues with your device, you can fix them with the help of a flash file. Also, it can help you to upgrade or downgrade the device to the factory version. In this article, we have talked about the Micromax Bolt A089 flash file. We have mentioned how you can install the Micromax Bolt A089 flash file (Firmware Stock ROM) with the help of a USB cable. Stay tuned to the article to know more about it.
Things to Keep in Mind
Before you can start the flashing process, there are certain things that you need to do so that you can carry out the process easily.
- To start with, you need to have some basic knowledge about the process. In case you are not aware of the technicalities, you will have to seek help from an expert.
- It is a must that you use this tutorial for the specified device only because if you won’t, you can damage the device.
- Next, you need to download the tool file and firmware file according to the device that you are using and from an authenticated source. Also, you need to download a compatible driver file.
- You must know that you can lose all the data after the completion of the process. So, you need to create a backup of all the data available on the device.
- You will also have to charge the device completely or at least up to 70 percent so that you can use the device till the end of the process.
- Lastly, you need to scan all the files to be sure that the files are safe to use on the system.
Steps to Install Micromax A089 Flash File
In this section of the article, we have mentioned how you can proceed with the process. Below we have mentioned all the steps that you need to follow to install the Micromax A089 flash file. Read all the steps carefully and follow in the same way as mentioned.
- To start with, you will have to download the SPD driver on your system. Now, you need to click on the downloaded file and open the installation window. Follow all the screen instructions appearing on the screen to complete the installation process. In case the driver is already present on the system, skip the step.
- Next, you will have to download the stock firmware file for your device. You will then have to extract the contents of the stock firmware file.
- After this, you need to download the SPD upgrade tool on the system, and then you will have to extract the contents of the tool file.
- Once done, you need to open the extracted tool folder and then click on the upgrade download file. The tool window will open on the screen.
- You will now have to click on the load packet option on the screen and then redirect the tool to the location where you have extracted the firmware file.
- After this, you need to turn off the device and then connect it to the system with the help of a USB cable.
- Also, you need to click on the start option to begin the process.
- Wait for the process to complete. When the process will complete, an upgrade successful message will appear on the screen.
- You will now have to terminate the tool window and detach the cable.
Download Micromax A089 Stock Firmware ROM (Flash File)
This is it. This was how you can install the Micromax A089 flash file on the device. Following all the steps in the same way as mentioned will help you to install the Micromax A089 Stock Firmware ROM easily. We hope that the article was helpful.