Off the chance you are looking for the Micromax Bolt AD3520 flash file, this article will be helpful for you. We have provided you with an original Micromax AD3520 flash file [Firmware Stock ROM] and explained how to install the same. Stay tuned to the article till the end to know more about it.
Things to Remember
Before you can start the installation process, there are certain things that you will have to do. These things will help you to install the Micromax AD3520 flash file easily.
- To start with, you need to have some basic knowledge about the process. In case you do not know, you will have to seek help from an expert. You always need to use the tutorial for the specified device only. Using the tutorial for any other device can be harmful to the device.
- It is a must to download the firmware file and driver file from an authenticated source and according to the device that you are using. You also need to download the latest version of the tool file.
- You would know that you will lose all the data after the completion of the process, so, you need to create a backup of all the data.
- It is a must to scan all the files so that you can be sure that they are safe to use on the system.
Steps to Install Micromax Bolt AD3520 Flash File
Hopefully, you have fulfilled all the requirements that we have mentioned in the previous section of the article. You can now pursue the process. Below we have mentioned all the steps that you need to follow to install the Micromax Bolt AD3520 Stock Firmware ROM on the device. Go through all the steps properly and follow in the same way as mentioned.
- To start with, you need to download the MediaTek driver on the system. You will then have to click on the downloaded file and open the installation window. Follow all the instructions appearing on the screen to complete the installation process. In case the driver is already available on the system, skip the step.
- Next, you need to download the stock firmware file for the device. You will then have to extract the contents of the firmware file.
- Also, you need to download the SP flash file on the device. Now, extract the contents of the tool files also.
- You will now have to open the extracted tool folder and then click on the flash tool file. It will open the tool window for you.
- In the tool window, you need to click on the scatter-loading option and download agent option. You can look for the scatter file in the stock ROM that you have downloaded.
- After this, you need to untick the preloader.bin option. You must do this because if you won’t, there are chances that you will brick the device.
- Now, click on the download option to start the flashing process.
- Next, turn off the device and then connect it to the device with the help of a USB cable. Also, press the volume up button of the device so that the tool can detect the device.
- When the tool will detect the device, the process of flashing will begin.
- Wait for the process to complete. When the process will complete, you will see a green ring on the screen.
- Finally, detach the cable and terminate the tool window.
Download Micromax AD3520 Stock Firmware ROM (Flash File)
This is it. This was all you need to know about installing the Micromax AD3520 Stock Firmware ROM. We have tried to provide you with all the information that you need to know about installing the Micromax Bolt AD3520 flash file on the device. Read the article till the end to know more about it.