Firmware update is important for the device if you have to fix bugs that you are facing with the device or add some new features to the device. There is a unique file for every different device. In this article, we are going to talk about the Micromax Bolt Supreme Q300 flash file. We have mentioned how you can install the Micromax Q300 flash file (Firmware Stock ROM) on the device. Read the article till the end to know more about it.
Before you can start installing the Micromax Q300 Stock ROM, there are certain things that you need to do. These things will help you to install the flash file easily.
- The very basic thing that you have to do is to be aware of the technicalities of the process. In case you are not aware of the technicalities, you will have to seek help from an expert.
- Also, you need to download the firmware file and the tool file from an authenticated source and look for the latest version of the files. You will also have to look for a compatible driver file.
- It is a must that you charge the device completely or at least up to 70 percent so that you can use it till the end of the process.
- You should also know that you will lose all the data available on the device, so, you will have to create a backup of all the data available on the device.
- Lastly, you need to scan all the files that you have downloaded to be sure that all the files are safe to use on the system.
Steps to Install Micromax Bolt Supreme Q300 Flash File
You will have to use the SPD upgrade tool to install the Micromax Q300 Bolt Supreme flash file. Here is how you can do it. Below we have mentioned all the steps that you need to follow to install the Micromax Q300 Stock Firmware ROM. Read all the steps carefully and follow in the same way as mentioned.
- First, you need to download the SPD driver on the system. You will now have to click on the downloaded file and then open the installation window. Follow all the instructions appearing on the screen to complete the installation window. If you already have the driver on the system, skip the step.
- Next, you need to download the stock firmware file for your device. It will download in zip format, so, you need to extract the contents of the firmware file.
- The next thing you need is to SPD upgrade tool. You will have to download it and extract the contents of the SPD upgrade tool.
- Once done, open the extracted tool folder and then click on the upgrade download file. The tool window will then open on the screen.
- You will now have to click on the load packet option in the tool window. Now, redirect the tool to the folder where you have extracted the firmware file.
- After this, you need to select the required flash file.
- Now, you need to turn off the device and then connect it to the system with the help of a USB cable.
- You will then have to click on the start option to begin the process.
- Wait for the process to complete. When the process will complete, you will get an upgrade successful message on the screen.
- Finally, terminate the tool window and detach the cable.
Download Micromax Q300 Stock Firmware ROM (Flash File)
So, now you have successfully installed the Micromax Bolt Supreme Q300 flash file. We have mentioned all the required information that you need to know before installing the Micromax Q300 Stock Firmware ROM on the device. Hopefully, the article was helpful to you.