If you are looking for the Micromax Canvas Nitro 3 E352 flash file, this article will be helpful for you. We have provided you with an original Micromax E352 flash file / Firmware Stock ROM and explained how you can install the same. Stay tuned to the article to know more about it.
Before you can begin installing the flash file, we will advise you to carry out a list of certain things so that you can carry out the process smoothly.
- To start with, you need to have some basic knowledge about the process. If you do not know, you will have to consult an expert.
- Always remember to use the tutorial for the specified device only. If you use the tutorial for any other device, you can damage the device.
- You must also know that you will lose all the data after the completion of the process. So, you need to create a backup of all the data.
- It is a must to charge the device completely or at least up to 70 percent so that you can use the device till the end of the process.
- You should also download the firmware file and tool file according to the device that you are using and from an authenticated source. Also, you need to look for compatible driver files.
- Scan all the files so that you can be sure that all the files are safe to use on the system.
Steps to Install Micromax Canvas Nitro 3 E352 Flash File
Now, that you have fulfilled all the requirements that we have mentioned in the previous section of the article, you can proceed with the process. Below we have mentioned all the steps that you need to follow to install the Micromax E352 Stock ROM. Go through all the steps properly and pursue the process in the same way as mentioned.
- First, you need to download the MediaTek driver on your system. You will then have to begin the installation process by clicking on the downloaded file. Complete the installation process by following all the instructions appearing on the screen. In case the driver is already available on the system, skip the step.
- Next, you need to download the firmware file for the device. Extract the contents of the firmware file for later use.
- You will then have to download the SP flash tool on the system and then extract the contents of the tool file.
- Now, you need to open the extracted tool folder and then click on the flash tool file. The tool window will then open on the screen.
- In the tool window, you need to click on the scatter-loading option and download agent option. You can look for the scatter file in the stock ROM that you have extracted.
- Next, you need to untick the checkbox for the preloader.bin option. You must do this because if you won’t, you can brick the device.
- You will then have to click on the download option to start the process.
- After this, you need to turn off the device and then connect it to the system with the help of a USB cable. It is a must to press the volume up button of the device so that the tool can detect the device.
- When the tool will detect the device, the process of flashing will begin.
- Wait for the process to complete. When the process will complete, you will see a green ring on the screen.
- In the end, remove the cable and close the tool window.
Download Micromax E352 Stock Firmware ROM (Flash File)
So, you have successfully installed the Micromax Canvas Nitro 3 E352 flash file on the device. We have tried to provide you with all the information that you need to know about installing the Micromax Canvas Nitro 3 E352 Stock Firmware ROM. Hopefully, the article has helped you.