Micromax D303 flash file- Stock Firmware ROM

micromax d303 flash fileIn case you are facing any issues with your Micromax D303 phone, you can use the Micromax D303 flash file (ROM) to fix all the issues. The Stock ROM firmware is easily available on the internet and you can get it on the manufacturer’s website. To install the Micromax D303 firmware, you will have to use the SP flash tool. Read the article to get a stepwise process on how to install the Micromax D303 flash file. Stay tuned to the article to know everything.

Points to Remember

Read the list of all the points that you need to keep in mind before starting the flashing process. You will have to make sure that you fulfill all the requirements and then only you will have to proceed with the process.

  1. The very first and basic requirement is to keep your phone completely charged. The process can take a long time to complete and hence the phone needs to be charged.
  2. Also, you need to create a backup of all your data and files. Post the flashing process, all your data will be deleted, therefore, it is good to create a backup of all the important things.
  3. Other than this, you will have to check your file for any virus attacks. Start the installation process only if you are sure that it is safe to install.
  4. Once done, you also need to check that you are using all the latest version tools and drivers on your system.

Steps to Install Micromax D303 Flash file using SP flash tool

The following instructions mentioned below are listed to install the Micromax D303 flash file on the MediaTek devices via the SP Flash tool. Follow the steps in the same order as they are mentioned so that you do not face any errors in the process.

  1. You have to initially get the MediaTek driver on your gadget and afterward install it. You can without much of a stretch discover it on the web. On the off chance that you have it, avoid the step, and continue further.
  2. After this, you have to locate the stock ROM for your device and afterward extract the compressed file on your device.
  3. When done, you have to download the SP flash tool on your framework. You can undoubtedly discover it on the web. The folder arrives in a zipped organization and you would then be able to separate it to your ideal area.
  4. After this, you should search for the flash_tool.exe file and afterward click on it to start the tool.
  5. When done, you should choose the option for scatter-loading, and afterward, you should tap on the scatter file. The file will be available in the Stock ROM. Micromax D303 stock firmware download
  6. In the window, you should search for the choice for Preloader and afterward unmark the checkbox. Flashing it can block your gadget.
  7. You will at that point need to tap on the download choice and afterward it will begin the flashing process. Micromax D303 flash file download
  8. Presently, you have to connect your device and the system through a USB cable in the wake of turning off your device. Whenever you have connected it, you can press the Volume button on your device.
  9. The process of flashing will begin when your device will be distinguished.
  10. Trust that the process will finish and afterward you will get a green ring on the screen. Micromax D303 stock firmware
  11. When done, you should end the tool you are utilizing and afterward eliminate the USB link to detach your device.

Following all the means in a similar request as we have recorded will assist you with introducing the Micromax D303 flash file. We trust that the article has helped you and was enlightening for you.

Leave a Reply