Flash files are distributed by the company only and you can find them easily on the internet. It is very easy to carry out the flashing process but most people are unaware of how to do the same. In this article, we are going to help you with the same. We have mentioned all the steps that you will have to follow to install the Micromax Bolt Q326 flash file. Using the Micromax Q326 flash file, you can also fix different issues with your device or unbrick the device. Stay tuned to the article to know more about it.
Here, in this section of the article, we have mentioned different things that you need to keep in mind before you can start the flashing process. Check out the list of all the things.
- Initially, you need to be sure that you are aware of the technicalities. Off the chance, you are not aware, you will have to seek help from an expert.
- You will have to create a backup of all the data present on the device. It is a must that you do that because if you won’t, there are chances that you will lose the data.
- Other than this, you will have to charge the device completely or at least up to 60 percent so that you can operate the device till the end of the process.
- Now, you will have to download the stock firmware file from an authenticated source only. It is a must that you check the compatibility of the tool.
- Moreover, we will advise you to make sure that you are using a safe file on your system. You can scan all the files before using them.
Steps to Install Micromax Bolt Q326 Flash File
To install the Micromax Q326 flash file, you will have to use the SPD tool. In this section of the article, we have mentioned how you can install the flash file. Read the steps carefully and follow in the same way as mentioned.
- To begin with, you will have to download the SPD driver on the system. You will then have to click on the downloaded file to open the installation window. You will now have to follow the steps to complete the installation process.
- Now, you will have to download the stock firmware file for the device. You will have to download the file from a compatible file with the device. Once downloaded, you will have to extract the contents of the file.
- Next, you will have to download the SPD upgrade tool on the system. You will have to extract the contents of the file also.
- Once done, you will have to open the extracted folder, and then you will have to click on the upgradedownload.exe file. It will open the tool window for you.
- You will have to click on the Browse option and then you will have to redirect the tool to the location where you have stored the flash file.
- When done, you will have to turn off the device, and also, you will have to connect it to the system using the USB cable.
- Now, you will have to click on the start button to begin the flashing process.
- Wait for the process to complete. When the process will complete, you will have to detach the cable and then terminate the tool window.
Download Micromax Q326 Stock Firmware ROM (Flash File)
So, now your device is flashed. This was all you need to know about how to install the Micromax Q326 flash file. We have provided you all the information that you need to know. We hope that the article helped.