In case you are looking for the Micromax Q427 flash file (Firmware Stock ROM), this is the right place you have to come to. Read the article to know how to use the Micromax Canvas Unite 4 Q427 flash file- Stock Firmware ROM. Stay tuned to the article to know more.
To carry out the process easier, there are some things that you need to do before starting the process. In this section of the article, we have mentioned all the things that you will have to do.
- First, you need to have some basic knowledge about the process. F you do not know, you will have to seek help from an expert.
- You will then have to charge the device at least up to 70 percent so that you can operate it till the completion of the process.
- You would know that you will lose the data after the completion of the process, so, you need to create a backup of all the data.
- Also, make sure that you scan all the files before installing them so that you can be sure that you are using a safe file on the system.
- Moreover, you need to download the files from an authenticated source only. It is a must that you do that because an incompatible file will make the process difficult for you.
Steps to Install Micromax Q427 Flash File
Now, as we have mentioned that you will have to use the SP flash tool to install the flash file, here is how you can use it. We have mentioned the full stepwise process that you will have to follow to install the Micromax Q427 flash file. Read the process carefully and follow in the same way as mentioned.
- Initially, you will have to download the Mediatek driver on the system. You will then have to click on the downloaded file to start the installation process. Follow the on-screen instructions to complete the process. In case you have it on the system, you will have to skip the step.
- Now, you will have to download the firmware file for your Micromax Q427 device. You will then have to extract the file to the desired folder.
- Next, you will have to download the SP flash tool on the system and then extract the files.
- When done, you will have to open the extracted folder and then you will have to click on the flash tool file.
- It will open the tool window for you and you will have to click on the scatter-loading option and the download agent option. You can look for the scatter file in the stock ROM of the device.
- Once done, you will have to click on the preloader.bin. It is important so that you do not brick the device.
- When done, you will have to click on the download button to start the flashing process.
- Connect the device to the system with the help of a USB cable. You need to remember to turn off the device. You will have to press the volume up button of the device so that the tool can detect it.
- Now, when the tool will detect it, the process of flashing will start.
- After this, you will have to wait for the process to complete and when it will complete, you will see a green ring on the system.
- When done, you will have to detach the cable and then you will have to terminate the tool window.
Download Micromax Canvas Unite 4 Q427 Firmware Stock ROM (Flash File)
Now that your device is flashed, you can start it again. This was the full stepwise process that you need to follow to install the Micromax Q427 flash file. We hope that this article helped.