Spice Smart Flo 359 (Mi-359) Firmware Stock ROM- Flash File

In case you are looking for the Spice Smart Flo 359 (Mi-359) flash file, this article will be helpful for the device. In this article, we have mentioned how you can install the Spice Mi-359 flash file / Firmware Stock ROM. Stay tuned to the article till the end to know more about it.

Things to Remember

There are certain things that you will have to carry out before you can carry out the flashing process. These things will help you to install the Spice Mi 359 flash file easily.

  • To start with, you need to be aware of the technicalities of the process. In case you are not aware of the process, you may have to seek help from an expert.
  • You will have to make sure to use the tutorial for the specified device only. In case you use it for any other device, it can be harmful to the device.
  • Also, you need to know that you will lose all the data after the completion of the process, so, you need to create a backup of all the data.
  • It is a must to scan all the files that you will download so that you can be sure that all the files are safe to use on the system.
  • You must know that you will have to use the device till the end of the process, so, you need to charge the device completely or at least up to 60 percent.

Steps to Install Spice Smart Flo 359 (Mi-359) Flash File

We hope that you have fulfilled all the requirements that we have mentioned in the above section of the article. You can now proceed with the process. Below we have mentioned all the steps that you need to follow to install the Spice Mi 359 flash file. Read all the steps properly and follow them in the same way as mentioned.

  • To begin with, you will have to download the MediaTek driver on the system. You will then have to click on the downloaded file and open the installation window. Follow all the instructions appearing on the screen to complete the installation process. In case the driver is already available on the system, skip the step.
  • Next, you need to download the stock firmware file for your device and then extract the contents of the firmware file.
  • Now, you need to click on the SP flash tool on the system and then extract the contents of the tool file.
  • When done, you need to open the extracted tool folder and then click on the flash tool file. The tool window will then open on the screen.
  • In the tool window, you will have to click on the scatter-loading option and download agent option. The scatter file will be available in the stock ROM that you have downloaded.
  • Now, you need to untick the preloader.bin option. You must do this because if you won’t, you will brick the device.
  • Next, you need to click on the download option to start the flashing process.
  • Also, you need to turn off the device and then connect it to the system with the help of a USB cable. You will also have to press the volume up button of the device so that the tool can detect the device.
  • When the tool will detect the device, the process of flashing will start automatically.
  • Wait for the process to complete. On completion of the process, a green ring will appear on the screen.
  • Lastly, detach the cable and terminate the tool window.

Download Spice MI-359 Stock Firmware ROM (Flash File)

To use Spice Smart Flo 359 (Mi-359) Flashing Tool, You must download and install WinRAR or 7Zip.

So, this is it. You have successfully installed the Spice Mi-359 flash file on the device. We have tried to provide you with all the information that you need to know about installing the Spice Smart Flo 359 (Mi-359) Stock Firmware ROM on the device. Hopefully, the article was helpful.

Leave a Reply