Vivo Y31L Firmware Stock ROM- Flash File Download

Vivo Y31L Flash FileOff the chance you are looking for the Vivo Y31L flash file, this article will surely help you. We have provided you with a tutorial on how to download the Vivo Y31L flash file [Firmware Stock ROM] on the system. Read the article completely to know in detail.


Before you can start the flashing process, there are certain things that you need to do. These things will help you to carry out the process smoothly.

  • To begin with, you need to have some basic knowledge about the process. In case you are not aware, you need to seek help from an expert.
  • It is a must that you use this tutorial for the specified device only. In case you use it on any other device, you can brick the device.
  • Also, you need to be sure that you charge the device completely or at least up to 60 percent so that you can use the device till the end of the process.
  • Other than this, you need to create a backup of all the data available on the device. You must do it because if you won’t, you will lose all the data after the completion of the process.
  • You will also have to download the tool file and driver file compatible with your device. Look for an authenticated firmware file for your device.
  • Lastly, you need to scan all the files to be sure that they are safe to use on the system.

Steps to Install Vivo Y31L Flash File

Now that you have fulfilled all the requirements that we have mentioned in the above section of the article, you can proceed with the process. Below we have mentioned all the steps that you need to follow to install the Vivo Y31L flash file on the device. Read all the steps properly and follow in the same way as mentioned.

  • To begin with, you will have to download the Android USB driver on the system. You will then have to click on the downloaded file and open the installation window. Follow all the instructions appearing on the screen to complete the installation process. In case you already have the driver on the system, skip the step.
  • Next, you will have to download the stock firmware for your device. You need to extract the contents of the firmware file for later use.
  • Also, you need to download the Qcom Phone download tool and extract the contents of the file.
  • Now, you need to open the extracted tool folder and then click on the GN_Qcom_download_tool file. The tool window will then open on the screen.
  • After this, you will have to choose your default language as English and proceed with the process.
  • Now, you need to choose the option to Save production data under the heading UpDataType.
  • Once done, in the soft path option, you will have to click on the Browse option and redirect the tool to the location where you have stored the firmware file.
  • Now, you will have to select an appropriate firmware file and then click on the start download button.
  • Also, turn off your device and then connect the device to the system with the help of a USB cable.
  • You will now have to wait for the process to complete. On completion, you will see a green bar on the screen.
  • In the end, terminate the tool window and detach the cable.

Download Vivo Y31L Stock Firmware ROM (Flash File)

To use Vivo Y31L Flashing Tool, You must download and install WinRAR or 7Zip.

This is it. You have successfully installed the Vivo Y31L flash file on the device. All the information that you need to know about installing the Vivo Y31L Stock Firmware ROM on the device is mentioned in the article. We hope that the article was helpful.

Leave a Reply