In case you are looking for the Xiaomi HM Note 1W flash file, this article will be helpful for you. In this article, we have mentioned how you can install the Xiaomi HM Note 1W flash file using the SP flash tool. We have tried to explain everything to you in detail. Read the article till the end to know more about the Xiaomi HM Note 1W flash file.
Below we have mentioned all the things that you need on your system before you start the flashing process. Read all the things below and make sure that you have them on your system.
- You need to be aware of some technicalities so that you can carry out the process without any errors.
- Also, you will have to charge your device so that you can use it till the end of the process.
- Other than this, you need to know that after post flashing you will lose all your data. So, you need to create a backup so that you do not lose it.
- You will have to download the tool and the driver from the authenticated website and make sure that it is safe to use on the system.
Steps to install Xiaomi HM Note 1W Flash File
Now, as we have mentioned that you will have to use the SP flash tool to install the Xiaomi HM Note 1W flash file. In this section, we have mentioned all the steps that you will have to follow to install the flash file. You need to follow the steps in the same way as we have mentioned.
- You will first have to download the MediaTek USB driver on your system and then by clicking on the downloaded file, you will have to start the installation process. You will have to follow all the on-screen instructions to complete the process.
- Once done, you will have to download the stock firmware for your device. You can find the stock firmware file on the internet according to the device you are using. Now, the file will download in zip format, you will have to extract the contents of the file.
- Now, you will have to download the SP flash tool on the system and then you will have to extract the contents of the file also.
- Once done, you will have to open the tool folder and then click on the flash tool file.
- It will then open the tool window for you. You will have to click on the scatter-loading option and then you will have to click o the download agent option. You can look for the scatter file in the Stock ROM of your device.
- Now, you will have to click on the preloader.bin option. It is a must because if you won’t, there are chances that you will brick your device.
- Once done, you will have to click on the download option to start the flashing process.
- You will then have to turn off your device and then you will have to press the volume up button of your device and then the tool will detect the device.
- Now, when the tool will detect the file, the process will start.
- You will now have to wait for the process to complete and on completion, you will see a green ring on the screen.
- Finally, you can detach the device and the system and you will have to end the tool windows.
Download Xiaomi HM Note 1W Stock Firmware
Following all the steps that we have mentioned above will help you to install the Xiaomi HM Note 1W flash tool. We hope that this article was beneficial for you.