Xolo Prime Firmware Stock ROM- Flash File Download

Xolo Prime Stock ROMIn case you are looking for the Xolo Prime flash file, this article will be helpful for you. In this article, we have provided you with an original Xolo Prime flash file (Firmware Stock ROM) and provided you with the tutorial for the same. Read the article completely to know more about it.

Points to Remember

Now, before you can start the flashing process, there are certain things that you need to do. These things will help you to carry out the process easily.

  • First, you need to make sure that you use the tutorial for the specified device only. Using the tutorial for any other device can damage the device.
  • You will also need to have some basic knowledge about the process. In case you are not aware, you need to seek help from an expert.
  • It is a must to download all the required files from an authenticated source and also, according to the device that you are using.
  • You will also have to scan all the files that you will download to be sure that all the files are safe to use on the system.
  • It is a must to charge the device completely or at least up to 70 percent so that you can use the device till the end of the device.
  • You must know that you will lose all the data available on the device after the completion of the process, so, you need to create a backup of all the data.

Steps to Install Xolo Prime Flash File

In this section of the article, we have mentioned how you can install the Xolo Prime flash file. Below we have mentioned all the steps that you need to follow to install the flash file on the device. Read all the steps carefully and follow in the same way as mentioned.

  • To begin with, you need to download the MediaTek driver on the system. You will now have to click on the downloaded file and open the installation window. Follow all the instructions appearing on the screen to complete the installation process. In case the driver is already available on the system, skip the step.
  • Next, you need to download the firmware file for the device. You will then have to extract the contents of the firmware file for later use.
  • After this, you need to download the SP flash tool on the system and also, extract the contents of the tool file.
  • Now, you need to open the extracted tool folder and then click on the flash tool file. The tool window will then open on the screen.
  • In the tool window, you need to click on the scatter-loading option and download agent option. You can look for the scatter file in the stock ROM that you have downloaded.
  • After this, you need to click on the preloader.bin option. You must do this because if you won’t, you can brick the device.
  • Once done, you need to click on the download option to begin the flashing process.
  • You will then have to turn off the device and connect it to the system with the help of a USB cable. It is a must to press the volume up button of the device so that the tool can detect the device.
  • When the tool will detect the device, the process of flashing will start.
  • Wait for the process to complete. When the process will complete, you will see a green ring on the screen.
  • Finally, detach the cable and terminate the tool window.

Download Xolo Prime Stock Firmware ROM (Flash File)

  • Xolo Prime Flash File for Windows
  • Xolo Prime Flash File for Linux

To use Xolo Prime Flashing Tool, You must download and install WinRAR or 7Zip.

So, this is it. You have successfully installed the Xolo Prime Stock Firmware ROM on the device. Following all the steps, in the same way, will help you to install the Xolo Prime flash file easily. We hope that the article has helped you.

Leave a Reply