YU YUPHORIA YU5010 flash file : Firmware Stock ROM

YU YUPHORIA YU5010 firmwareIf you are looking for the Yu5010 flash file, this is the right article for you. You need to follow the article only if you are using the Yu Yuphoria Yu5010 device. If you are not using that device and continue with the process, there are high chances that you will end up bricking your phone.

The Yu 5010 flash files can help you to unbrick your device, get your device to the same version as it was when you bought it, or even upgrade your device to the latest version. You can also use the stock firmware files to fix issues you are facing with your device. You can fix the boot loop issues, dead issues, or software issues with the flash files. In this article, we are going to talk to you about how you can use the Yu5010 flash file. The stepwise to be followed to use the Yu5010 firmware ROM has been mentioned in the process. Read the article till the end to know more.


Read the list of all the requirements that you need to fulfill before proceeding with the flashing process.

  1. Ensure that you have charged your device enough to keep it working till the end of the process. It s advised to keep it charged at least 60 percent before you start to flash your device.
  2. After this, you will have to back up all the data present on your device. Once you flash your device, all the data will be deleted permanently and hence you need to back up the data.
  3. Also, you will have to make sure that you have at least some knowledge about the flashing process. If you don’t have any knowledge about it, we will not recommend you proceed with the process.
  4. Next, you will also have to download the latest version of all the stock firmware files and the tool on your system. You can look for the latest version on the internet.
  5. Lastly, you will have to make sure to scan all your files. You need to scan the file to be sure that you can install the file on your system.

Steps to install the Yu5010 Flash File

You will have to use the SP flash tool to install the Yu5010 flash file. Follow the steps mentioned below to install the stock firmware. Read the steps carefully.

  1. First, you will have to download the USB driver on your system and then install the driver on your system.
  2. After this, you will have to look for the stock ROM and download it. You will then have to extract all the files to a new folder.
  3. The next step is to download the SP flash tool and extract the file also.
  4. Once done, from the folder, you will have to click on the flash-tool.exe file and it will then launch the tool.
  5. You will then have to click on the option of download on the tool window.
  6. After this, you will have to look for the scatter-loading option and then look for the scatter file. Yu5010 stock firmware download
  7. Once done, select the download option and then start the process of flashing. Yu5010 flash file download
  8. You will then have to switch off your device and then by using the USB cable, you will have to connect the device and the system. Once done, you will have to press the volume button of your device.
  9. When your device will be detected, the process will be started.
  10. Wait for it to complete and once done, you will get a green ring on the screen. Yu5010 stock firmware
  11. Finally, close the tool window and disconnect your device.

We hope that all the steps that we have mentioned will help you to install the Yu5010 flash file. Hope the article helps.

Leave a Reply